| Adjustments
|
|
 |
|
| Troubleshooting |
|
|
The pedal works when the magnet gets close to the sensor. Changing the distance of the magnet through adjusting the screw or raising the height of the stopper can change when it triggers (or fixes it if it isn't triggering at all).
|
|
|
To raise the height of the stopper, unscrew the screw inset inside the stopper and pull the stopper off. Then insert washers or anything that you can get that will fit under the stopper as to raise the stopper's height. Then screw the stopper back in. This may be a trial and error process.
|
|
|
|
|
|
Loosen the screw and move the part where it attaches to the pedal left or right. Moving to the left will decrease sensativity of the trigger. Moving it to the right will decrease sensativity and make the trigger trip earlier. |
|
If you're having trouble with the pedal sliding, buy a cheap rubber bathmat from Walmart or the Dollar Store (or anywhere else that sells such things cheap). It should run about 5$. Any further questions, please email info@rockbandpedal.net |
|